DESCRIPTION AND OPERATION
Axle Identification Tag
Driveshaft, Front
Driveshaft, Rear
Driving Axle, Front
Driving Axle, Rear
Brake System, Anti-Lock, Rear and 4-Wheel
DIAGNOSIS AND TESTING
Inspection and Verification
U-Joint Inspection
Alignment Inspection, Rear Axle and Suspension
Preliminary Diagnosis
Analysis of Leakage
Analysis of Vibration
Axle Noise
Analysis of Gear Noise
Analysis of Inoperative Conditions
Symptom Chart — Axle And Driveshaft Service
Component Tests
Driveline Vibration
Traction-Lok® Differential
Limited Slip Differential
Universal Joint Flange Runout Check, Rear Axle, Circular
Universal Joint Flange Runout Check, Rear Axle, Half-Round
Tooth Contact Patterns Check of Gearset
CLEANING AND INSPECTION
Inspection Before Disassembly of Axle
Axle Backlash Check
Inspection After Disassembly of the Axle
Gears
Rear Brake Anti-Lock Sensor
Anti-Lock Speed Sensor Ring
Bearing Cups and Cone and Roller Assemblies
Universal Joint Flange, Rear Axle
Differential Housing
Differential Case
Limited Slip Differential Parts
Wheel Bearing and Seal
ADJUSTMENTS
Axles
U-Joint Phasing
Driveline Support Plate Position, Adjustable
Driveshaft Alignment
Driveline Angle Correction
Coupling Shaft Angle Adjustment
Driveshaft and Pinion Angle Adjustment
Engine Angle Adjustments
Driveshaft Runout and Balance
Alternate Procedure
Pinion and Ring Gear Adjustment
Slip-Yoke Spline
LUBRICATION
Axle Lubrication, Rear
Draining and Filling
U-Joints
Slip Yoke
SPECIFICATIONS
SPECIAL SERVICE TOOLS/EQUIPMENT
