SECTION 303-01B: Engine — 3.0L (4V)
2002 Escape Workshop Manual
IN-VEHICLE REPAIR
Procedure revision date: 10/21/2002

Crankshaft Front Oil Seal

Special Tool(s)
Installer, Front Oil Seal
303–335 (T88T-6701–A)
Remover, Oil Seal
303–409 (T92C-6700–CH)

Material
ItemSpecification
SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP		WSS-M2C153-H
Metal Surface Cleaner
F4AZ-19A536-RA		WSE-M5B392-A

Removal

  1. Remove the crankshaft pulley. For additional information, refer to Crankshaft Pulley in this section.
  1. Using the special tool, remove the crankshaft front oil seal and discard.

Installation

  1. NOTE: Clean all sealing surfaces with metal surface cleaner.

    Apply clean engine oil to the seal before installing the seal.
  1. Using the special tool, install the crankshaft front oil seal.
  1. Install the crankshaft pulley. For additional information, refer to Crankshaft Pulley in this section.