Section 17-02: Lighting, Interior
1996 F-150, F-250, F-350, F-Super Duty Chassis Cab and Bronco Vehicles Workshop Manual
REMOVAL AND INSTALLATION

Lamp, Glove Compartment

Removal

  1. Open glove compartment door (06024).

  1. Remove the one screw retaining the lamp/striker assembly to the instrument panel (04320).

  1. Pull the lamp/striker assembly down and disconnect the wiring connector.

Installation

  1. Connect the wiring connector to the lamp/striker assembly.

  1. Position the lamp/striker assembly to the instrument panel and install retaining screw. Do not tighten the screw.

  1. Adjust the glove compartment door closed position with the lamp/striker assembly. Tighten lamp/striker assembly retaining screw.