Section 17-02: Lighting, Interior
1996 F-150, F-250, F-350, F-Super Duty Chassis Cab and Bronco Vehicles Workshop Manual
REMOVAL AND INSTALLATION

Lamp, Cargo, Bronco

Lens

Removal

  1. Remove two screws retaining the pillar/dome lamp lens (13783) to the interior lamp door (13788).

  1. Pull pillar/dome lamp lens from the interior lamp door.

  1. Pull miniature bulb (13466) out of interior lamp door.

Installation

  1. Follow removal procedures in reverse order.

Lamp Assembly

Removal

The interior lamp door is glued to the roof trim panel (51968).

  1. Remove the roof trim panel. Refer to Section 01-05.

  1. Carefully separate the interior lamp door from the roof trim panel.

Installation

  1. Using an appropriate glue, install the new interior lamp door and install the roof trim panel.



Cargo Lamp, Bronco





ItemPart NumberDescription
113788Interior Lamp Door
213A625Wiring Assembly
313783Pillar/Dome Lamp Lens
4N610051-S45Screws (2 Req'd)
A—Tighten to 3.5-4.5 Nm
(27-35 Lb-In)