Release the MODE button and after a few seconds the display will return to the normal compass heading mode. The zone adjustment is now complete.
Section 13-07: Compass/Outside Temperature Display | 1996 Eddie Bauer Bronco Workshop Manual |
The vehicle has been demagnetized and the compass calibrated by the manufacturer. However, the zone adjustment is not done by the manufacturer.
When the vehicle is received from the manufacturer or whenever a vehicle operator claims that the compass is inaccurate, first perform the zone adjustment. The compass zone adjustment is as follows:
Determine which zone of the continent you are in by using the accompanying zone map.
Press and hold the MODE button until VAR appears on display. The overhead console will display the current zone number.
Press the MODE button until the appropriate zone number appears on the display. (The zone number will increment once each time the MODE button is pressed. Once the number reaches 15, the next press will change the zone to 1.)
Release the MODE button and after a few seconds the display will return to the normal compass heading mode. The zone adjustment is now complete.