Section 13-01: Instrument Cluster, Conventional
1996 F-150, F-250, F-350, Bronco, F-Super Duty Motorhome Chassis Workshop Manual
REMOVAL AND INSTALLATION

Indicator/Warning Bulbs

NOTE: The removal and installation procedures are identical for all indicator/warning lamps.

Removal

  1. Disconnect the battery ground cable (14301).

  1. Remove instrument cluster opening finish panels. Refer to Section 01-12.

  1. Remove screws attaching instrument cluster (10849) to instrument panel (04320).

  1. Pull instrument cluster rearward to provide access to the back of instrument cluster.

  1. Turn the desired indicator/warning lamp counterclockwise.

  1. Remove bulb from its socket.

 

Installation

  1. Follow removal procedures in reverse order.

  1. When installing the instrument cluster bulb, make sure pins are properly seated into the instrument cluster backplate.

  1. Check system operation.







    Rear View of Instrument Cluster (Base), F-Series and Bronco






    Rear View of Instrument Cluster (Optional), F-Series and Bronco Super Duty