Section 13-01: Instrument Cluster, Conventional
1996 F-150, F-250, F-350, Bronco, F-Super Duty Motorhome Chassis Workshop Manual
REMOVAL AND INSTALLATION

Instrument Cluster Temperature Gauge

Removal

  1. Remove instrument cluster (10849) from instrument panel (04320).

  1. Remove screws attaching the instrument cluster main lens (10887) and instrument cluster mask (10890) to instrument cluster backplate.

  1. Remove instrument cluster main lens and instrument cluster mask.

  1. NOTE: The instrument cluster temperature gauge is attached to the instrument cluster backplate by retaining clips.

    Remove the instrument cluster temperature gauge from instrument cluster backplate by grasping the outside edges of gauge and lifting.

 

Installation

  1. Follow removal procedures in reverse order.

  1. When installing the instrument cluster temperature gauge, make sure pins are properly seated into the instrument cluster backplate retaining clips.

  1. Check system operation.