Section 12-02: Heating and Defrosting
1996 F-150, F-250, F-350, F-Super Duty and Bronco, F-Super Duty Motorhome Chassis Workshop Manual
REMOVAL AND INSTALLATION

Blower Motor Switch Resistor Assembly

Removal

  1. Pry the wire connector from the heater blower motor switch resistor (18591).

  1. Remove the two screws that attach the heater blower motor switch resistor to the heater plenum chamber case (18A484).

 

Installation

  1. Follow removal procedures in reverse order.

  1. Check operation in all blower speeds.