Section 11-05: Steering Column Switches | 1996 F-150, F-250, F-350, F-Super Duty, F-Super Duty Motorhome and Bronco Workshop Manual |
NOTE: The turn signal system is deactivated when the hazard flasher system is on. Turn signal lever motion does not affect the hazard flasher system.
The hazard flasher system operates independently from the ignition switch (11572). All turn signal lamps can be made to flash in unison by depressing and releasing the hazard actuator located on the top part of the steering column. The switch is identified by a double triangle symbol.
The actuator will move out or away from the steering column tube (3514) to the ON position. The hazard flasher system is turned off by first pushing in the actuator and then releasing the actuator. The actuator should remain in or toward the steering column in the OFF position.