High Beam/Flash-to-Pass Switch

The multi-function switch (13K359) also operates the headlamp dimmer switch and the flash-to-pass feature. High beam or Auto-Dim (optional) is selected by moving the turn signal lever away from the driver to the stop. Releasing the lever will maintain high beams or Auto-Dim (optional). Low beam is selected by moving the turn signal lever toward the driver from the high beam position. Releasing the lever will maintain low beams.

To operate the flash-to-pass feature, pull the turn signal lever gently toward the driver. When the turn signal lever is released, it will return to the LO beam position. If driving without headlamps on, use of the flash-to-pass feature will turn on the high beams until the turn signal lever is released. If the headlamps are turned on, the low and high beams will be on until the turn signal lever is released.

NOTE: Excessive force used to hold the turn signal lever in the flash-to-pass function followed by quick release may result in incorrect headlamp dimmer selection of high beam. The driver must be cautioned to avoid this condition.