Section 11-00: Steering System, Service | 1996 F-150, F-250, F-350, Bronco and F-Super Duty Workshop Manual |
| Description | Nm | Lb-Ft |
|---|---|---|
| Steering Gear to Frame | 73-89 | 54-66 |
| Steering Gear Sector Shaft Arm toSteering Gear | 230-310 | 170-230 |
| Drag Link/Tie Rod End Studs | 70-100 | 52-74 |
| Linkage Adjusting Sleeve Clamp F-150, F-250, F-350, Bronco | 40-57 | 29-41 |
| Linkage Adjusting Sleeve Clamp (F-Super Duty) | 81-126 | 60-93 |
| Power Steering Pump to Power Steering Pump Support (All) | 40-55 | 30-40 |
| Power Steering Fluid Cooler to Power Steering Cooler Bracket F-150, F-250, F-350 (All) | 15-21 | 11-16 |
| Power Steering Pressure Hose (Pump) | 34-46 | 25-34 |
| Power Steering Pressure Hose and Power Steering Return Hose (Gear) | 30-40 | 25-30 |
| Flange and Insulator Assembly to Steering Gear F-150, F-250, F-350, Bronco | 33-50 | 24-37 |
| Flange and Insulator Assembly to Steering Gear F-150, F-250, F-350, Bronco | 41-57 | 30-42 |
| Yoke Assembly to Intermediate Shaft | 41-57 | 30-42 |
| Steering Column to Steering Column Shaft | 31-44 | 23-33 |
| Steering Column to Support Bracket | 13-17 | 10-13 |
| Steering Column Support Bracket to Body Side Cowl | 33-55 | 24-41 |
| Steering Column (Floor Opening Cover Plate to Floor) | 16-20 | 12-15 |
| Sector Adjuster | 48-61 | 35-45 |
| Sector Shaft Cover | 75-94 | 55-69 |
| Hose Connections | 30-40 | 22-30 |
| Control Valve Housing Mounting Face | 42-62 | 31-46 |
| Power Steering Pump Valve Outlet Fitting | 35-54 | 26-40 |
| Hose Tube Nut | 41-54 | 30-40 |
| Description | Nm | Lb-Ft |
|---|---|---|
| Steering Column Lower Bearing Retainer | 14-18 | 10-14 |
| Floor Opening Cover Plate | 11-15 | 8-11 |
| Intermediate Shaft Lock Bolt | 27-47 | 20-35 |
| Analyzer to Adapters | 41-54 | 30-38 |
| Power Steering Pressure Hoses to Brake System Booster | 34-46 | 25-34 |
| Description | Specification |
|---|---|
| Type | Recirc. Ball |
| Ratio | 17:1 |
| Turns of Steering Wheel (Lock to Lock — Linkage Disconnected) | 4 |
| Fluid Capacity (Included in Pump Reservoir Fill) | 0.75L (1.6 Pint Approx.) |
| Fluid Specification | ESW-M2C33-F E4AZ-19582-C E6AZ-19582-AA XT-1-QF or Equivalent |
| Worm Bearing Preload | 0.45-1.0 Nm (4-9 Lb-In) Not adjustable in field. Specification given for inspection purposes only. |
| Worm to Piston Preload | 0.11-0.34 Nm (1-3 Lb-In) Not adjustable in field. Specification given for inspection purposes only. |
| Description | Specification |
|---|---|
| Steering Ratio (Input to Output Shaft) | 20.4:1 |
| Steering Wheel Revolutions for 90-Degree Rotation of Output Shaft | 5.1 |
| Maximum Output Shaft Rotation | 95° (Maximum Travel) |
| Maximum Output Shaft Torque with 1800 psi (124-Bar) Power Assist | 1960 Lb-Ft |
| Power Steering Fluid | Motorcraft MERCON® Multi-Purpose Automatic Transmission Fluid XT-2-QDX or -DDX |
| Maximum Working Temperature | 120°C (248°F) |
| Maximum Peak Temperature | 150°C (302°F) |
| Maximum Working Pressure | 1800 psi (124-Bar) |
| Maximum Pressure Drop in the Return Line | 43 psi (3-Bar) |
| Normal Flow | 4.2 gpm (16 Liters/min.) |
| Pump Model | Minimum Flow @ 740 psi | Minimum Pressure Relief | Maximum Pressure Relief | |||
|---|---|---|---|---|---|---|
| Liters/Minute 76°C ± 15°C | Gallons/Minute 170°F ± 5°F | kPa | psi | kPa | psi | |
| HBC-JX | 5.3 | 1.4 | 9650 | 1400 | 10550 | 1530 |
| HBC-JY | 5.7 | 1.5 | 10000 | 1450 | 10550 | 1530 |
| Pump Model | Displacement | Minimum Flow @ 725 psi | Control Flow (+20%-10%) | Weight | Maximum Speed | ||||
|---|---|---|---|---|---|---|---|---|---|
| CC | CI | Liters/Min. | Gals./Min. | Liters/Min. | Gals./Min. | Kg | Lbs. | ||
| 7673 | 16.5 | 1.01 | 6.1 | 1.6 | 16 | 4.2 | 5.6 | 12.3 | 4500 rpm |