Section 10-03: Speed Control System, Electronic
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Deactivator Switch

Removal

  1. Disconnect deactivator switch connector. Deactivator switch is located on the brake master cylinder (2140), F-Series and Bronco.

  1. Unscrew switch and remove.

 

Installation

  1. Follow removal procedures in reverse order.

  1. Tighten switch to 15-20 Nm (11-14 lb-ft).

  1. Bleed brake lines. Refer to Section 06-06.