Section 10-02: Accelerator Pedal and Linkage
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
ADJUSTMENTS

Kickdown Control Shaft Rod, 7.3L Diesel, C6 Automatic

  1. Apply a six-pound weight to the transmission shift bellcrank (7A185).

  1. Rotate throttle to wide-open position.

  1. Insert 1.5mm (.060 inch) spacer between the throttle lever and adjusting screw.

  1. Rotate adjusting screw until contact is made between screw and spacer, then tighten lock nut.

  1. Remove spacer.

  1. With spacer removed, a gap of 1.7-2.5mm (.070-.010 inch) is acceptable.

  1. Remove the six-pound weight.