Section 09-00: Exhaust System
1996 F-150, F-250, F-350, F-Super Duty, Bronco and Motorhome Chassis Vehicles Workshop Manual
REMOVAL AND INSTALLATION

Exhaust Inlet Pipe

Removal

  1. Remove the muffler (5230),muffler inlet pipe (5A212) and catalytic converter.

  1. Remove exhaust manifold-to-exhaust inlet pipe nuts.

  1. Remove the exhaust inlet pipe (5246) from the vehicle.

Installation

To install, perform the removal procedure in reverse order. Tighten the RH exhaust manifold-to-exhaust inlet pipe nut halfway, tighten the LH nut to 34-46 Nm (25-34 lb-ft) and tighten the RH nut to 34-46 Nm (25-34 lb-ft).