Section 08-00: Clutch System, Service
1996 F-150, F-250, F-350, F-Super Duty Chassis Cab and Bronco Equipped with Manual Transmission Workshop Manual
REMOVAL AND INSTALLATION

Dowels, Transmission Housing to Block

Removal

  1. Remove the transmission. Refer to Section 07-03A or Section 07-03B.

  1. NOTE: Transmission housing to block dowels should be pulled or driven from their seat. Do not damage surface area around the transmission housing to block dowel.

    Use a drift pin on drilled holes and vice grip pliers or a similar tool on blind holes to remove transmission.

 

Installation

  1. NOTE: Drive transmission housing to block dowel squarely into place until fully seated. Do not damage the surrounding surface area.

    Install all solid type transmission housing to block dowels by driving into place using a brass or plastic mallet.