Section 07-14A: Transmission Range (TR) Sensor
1996 F-Series and Bronco Equipped with E4OD and 4R70W Transmissions Workshop Manual
ADJUSTMENTS

Transmission Range (TR) Sensor

SPECIAL SERVICE TOOL(S) REQUIRED
DescriptionTool Number
Transmission Range (TR) Sensor (MLPS) Alignment ToolT92P-70010-AH

  1. Remove nut securing manual control lever (7A256) to transmission range (TR) sensor.

  1. Turn manual control lever to NEUTRAL position.

  1. Loosen two TR sensor retaining bolts.

  1. Align TR sensor slots using Transmission Range (TR) Sensor (MLPS) Alignment Tool T92P-70010-AH.

  1. Tighten retaining bolts to 6-8 Nm (55-75 lb-in) for E40D and to 7-10 Nm (62-89 lb-in) for 4R70W.

  1. Install nut retaining manual control lever to TR sensor. Tighten to 27-38 Nm (20-29 lb-ft) for E4OD and to 30-35 Nm (22-26 lb-ft) for 4R70W.