Section 07-07C: Transfer Case, Heavy-Duty, Manual Shift | 1996 F-250 and F-350 Except 137-Inch Wheelbase Chassis Cab with E4OD Transmission Workshop Manual |
The Borg-Warner 44-07 manual shift transfer case (7A195) is a part-time two-piece transfer case. The case is aluminum. The unit is lubricated by a positive displacement oil pump that channels oil flow through drilled holes in the rear output shaft. The pump turns with the rear output shaft, and allows towing of the vehicle without disconnecting the rear driveshaft.
The input shaft, front output shaft, 4WD indicator switch, breather barb, and shift lever are located on the front case half. The rear output shaft and drain and fill plugs are located on the rear case half.
| Item | Part Number | Description |
|---|---|---|
| 1 | 7034 | Vent |
| 2 | 7B106 | Shift Lever |
| 3 | 7B214 | Case Yoke, Front |
| 4 | 7061 | Output Shaft |
| 5 | 7E440 | FWD Indicator Switch |
| 6 | 7017 | Input Shaft |
| 7 | 87675-S | Fill/Drain Plug |
| 8 | 7B214 | Case Yoke, Rear |