Section 07-07A: Transfer Case, Electronic Shift | 1996 F-150 4x4 Vehicles with Automatic Transmissions and All Bronco Vehicles Workshop Manual |
Push-Button Control Switch
There are two control buttons located on the upper right corner of the instrument panel for fingertip shift control. The two buttons are mounted horizontally and are identified as "4x4" and "LOW RANGE." Two indicator bar lamps are located in the instrument cluster.
Park/Neutral Position Switch (PNP)/Transmission Range Selector Switch (TRS)
Vehicles equipped with automatic transmissions (7003) use either a park/neutral position switch or a transmission range selector switch which is located on the left side of the transmission. Its purpose when dealing with electronic shift transfer cases (7A195) is to allow range shifting only when the transmission is in the NEUTRAL position.
| Item | Part Number | Description |
|---|---|---|
| 1 | 7003 | Transmission |
| 2 | — | To Rear Axle |
| 3 | 7A195 | Transfer Case |
| 4 | 7E063 | Skid Plate |
| 5 | — | To Front Axle |
| 6 | 7G360 | Transfer Case Shift Motor |
| 7 | 14A206 | Wiring Connector Bracket |
| 8 | — | Shift Position Sensor (Part of 7G360) |
| 9 | 7A010 | Fill Plug |
| 10 | 7B214 | Rear Output Flange |
| 11 | 7A247 | Speed Sensor |
| 12 | — | Wiring Harness Connector (Part of 7G360) |
| 13 | 7A010 | Drain Plug |