Section 07-01A: Transmission, Automatic, E4OD
1996 All F-Series and Bronco with E4OD Automatic Transmission Workshop Manual
CLEANING AND INSPECTION

Main Control Valve Body

  1. Clean all parts thoroughly in clean solvent and blow dry with moisture-free compressed air.

  1. Inspect all valve and plunger bores for scores. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.

  1. Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. Valves and plungers, when dry, must fall from their own weight in their respective bores.

  1. Roll manual shift valve (7C389) on a flat surface to check for bent condition.