Section 06-09B: Brake, Anti-Lock, 4-Wheel
1996 Bronco Workshop Manual
REMOVAL AND INSTALLATION

Stoplight Switch

 

Removal

  1. Disconnect wiring harness connector from stoplight switch (13480).

  1. Remove self-locking pin and spacer from brake pedal pin.

  1. Slide brake booster rod and stoplight switch off brake pedal pin.

  1. Remove stoplight switch and bushing from brake booster rod.

 

Installation

  1. Position bushing in stoplight switch.

  1. Position stoplight switch on brake booster rod, aligning holes.

  1. Slide brake booster rod and stoplight switch onto brake pedal pin.

  1. Install spacer and self-locking pin on brake pedal pin.