Section 06-06: Brake System, Hydraulic | 1996 F-150, F-250, F-350, Bronco and F-Super Duty Workshop Manual |
Description | Nm | Lb-Ft | Lb-In |
---|---|---|---|
Master Cylinder-to-Vacuum Booster Nut (all Except F-Super Duty with Hydro-Boost) | 18-34 | 13-25 | — |
Vacuum Booster-to-Firewall and Pedal Support Nut (all Except F-Super Duty with Hydro-Boost) | 18-34 | 13-25 | — |
Master Cylinder to Hydro-Boost — F-Super Duty | 22-30 | 16-22 | — |
Hydro-Boost to Mounting Brackets — F-Super Duty | 22-30 | 16-22 | — |
Master Cylinder to Power Brake Booster Nut | 24-34 | 18-25 | — |
Brake Rod Jam Nut | 50-67 | 37-49 | — |
Brake Tube Clip Nut | 30-40 | 22-30 | — |
Screw, Pedal and Bracket Assembly-to-Y-Brace, F-Series and Bronco | 20-27 | 15-20 | — |
Nut, Bellcrank Pivot Bolt, F-Super Duty Commercial Chassis | 47-67 | 35-49 | — |
Nut, Bracket-to-Dash Panel, F-Super Duty Commercial Chassis | 20-27 | 15-20 | — |
Nut, Booster Mounting Bracket-to-Frame, F-Super Duty Motorhome Chassis | 88-104 | 65-77 | — |
Pedal Shaft Nut, F-Super Duty Motorhome Chassis | 50-67 | 37-49 | — |
Nut, Bellcrank Pivot Bolt, F-Super Duty Motorhome Chassis | 50-67 | 37-49 | — |
Front Disc Brake Caliper Flow Bolt | 30-40 | 22-30 | — |
Front Brake Hose Bolt | 3-5 | — | 27-44 |
Brake Tube-to-Master Cylinder Fitting (Rear) | 15-20 | 11-15 | — |
Brake Tube-to-Master Cylinder Fitting (Front) | 22-28 | 16-21 | — |
Height Sensing Proportioning Valve Mounting Bolts | 30-40 | 22-30 | — |
Height Sensing Proportioning Valve Bracket to Frame Bolt | 26-41 | 19-30 | — |
Brake Load Sensor Proportioning Valve Linkage-to-Differential Housing Nuts | 34-46 | 25-34 | — |
Brake Load Sensor Proportioning Valve Shaft Nut | 11-14 | 8-10 | — |
Flow Bolt, Height Sensing Proportioning Valve | 23-34 | 17-25 | — |
Nut, Height Sensing Proportioning Valve Linkage Arm | 15-20 | 11-15 | — |
Wheel Cylinder Bleeder Screws | 7-9 | — | 62-80 |
Caliper Bleeder Screws | 17-23 | 13-17 | — |
Anti-Lock Brake Control Module-to-Frame Nut | 17-23 | 13-17 | — |