Section 06-06: Brake System, Hydraulic
1996 F-150, F-250, F-350, Bronco and F-Super Duty Workshop Manual
REMOVAL AND INSTALLATION

Fluid Control Valve, Brake Master Cylinder

 

Removal

  1. Disconnect the brake tube from the outlet port at the rear of the brake master cylinder (2140).

  1. Unscrew the brake master cylinder fluid control valve and remove it from the brake master cylinder.

 

Installation

  1. Follow removal procedures in reverse order.

  1. Tighten the brake tube-to-brake master cylinder fitting to 22-28 Nm (16-21 lb-ft).