Section 06-05: Brake System, Parking
1996 Bronco, F-150, F-250, F-350, F-Super Duty Chassis Cab and Motorhome Chassis Vehicles Workshop Manual
REMOVAL AND INSTALLATION

Cable and Conduit, Front

Removal

  1. Remove the parking brake control (2780) and disconnect the front parking brake cable and conduit (2853) as described in this section.

  1. Remove the front parking brake cable and conduit from the vehicle.

Installation

  1. Position the front parking brake cable and conduit in the vehicle, routing it through the floorpan.

  1. Install the parking brake control as described in this section.