Service Precautions

Observe the following precautions when servicing the rear disc brake system:

• When removing a disc brake caliper (2B120), never allow the disc brake caliper to hang from the rear brake hose. Provide a suitable support.
• Replace brake shoes and linings (2001) when they reach a thickness of 0.794mm (.03125 in.).
• Always replace all brake shoes and linings on an axle. Never service only one side.
• Do not allow grease, oil or other contaminants to contact the brake lining material.
• When removing brake parts, make sure to avoid damage to the bleeder screw and rear wheel disc brake shield (2C028).
• During installation, make sure that all parts are correctly aligned.