Section 05-03B: Axle, Front Drive, Dana Model 60 Monobeam
1996 F-350 4x4 Workshop Manual
DISASSEMBLY AND ASSEMBLY

Pinion Bearing Cup Installation

SPECIAL SERVICE TOOL(S) REQUIRED
DescriptionTool Number
Pinion Bearing Cup ReplacerT56T-4616-B
Includes: 
Inner Bearing Cup ReplacerT56T-4616-B2

Outer Bearing Cup Replacer		T56T-4616-B1
Threaded DrawbarT75T-1176-A

  1. Place the preload shims and oil slinger, if required, under the inner differential drive pinion bearing cup (4616) as shown.

  1. Place the inner and outer differential drive pinion bearing cups into the carrier bore.

  1. Place the Inner Bearing Cup Replacer T56T-4616-B2 (part of Pinion Bearing Cup Replacer T56T-4616-B) on the inner differential drive pinion bearing cup.

  1. Place the Outer Bearing Cup Replacer T56T-4616-B1 (part of Pinion Bearing Cup Replacer T56T-4616-B) on the outer differential drive pinion bearing cup.

  1. Install the Threaded Drawbar T75T-1176-A into the replacer tools. Tighten the drawbar to install the differential drive pinion bearing cups into the carrier bore.



    Pinion Bearing Cup Installation





    ItemPart NumberDescription
    1T56T-4616-B2Inner Bearing Cup Replacer (Part of T56T-4616-B)
    2T56T-4616-B1Outer Bearing Cup Replacer (Part of T56T-4616-B)
    3—Inner Cup Installation View
    4—Outer Cup Installation View
    5T75T-1176-AThreaded Drawbar
    64616Differential Drive Pinion Bearing Cup (Outer)
    74628Rear Axle Pinion Bearing Cup (Inner)