Section 05-02C: Differential, Limited Slip, Ford 10.25-Inch Ring Gear
1996 F-250, F-350 Equipped with Ford 10.25-Inch Ring Gear Axle and Limited Slip Differential Workshop Manual
SPECIFICATIONS

SPECIFICATIONS

Lubricant Capacities And Checking Procedures (Integral Rear Axle Differential Carrier)
VehicleAxleApproximate Lubricant Capacity (In-Vehicle Repair) a b
U.S. PintsImperial PintsLiters
F-250, F-350 Regular & Chassis Cab, F-250, F-350 H.D.10.25-Inch Ring Gear6.5 c d5.43.0
a Ford design conventional axles use Premium Rear Axle Lubricant XY-80W90-QL or -KL or equivalent meeting Ford specification WSP-M2C197-A.
b Service refill capacities are determined by filling the axle with the specified lubricant to the bottom of the filler hole with the vehicle in running position.
c Plus 8 oz. (U.S. measure) additive friction modifier, C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A for Limited Slip applications.
d Rear axle lube quantities must be replaced every 160 000 km (100,000 miles) or if the axle has been submerged in water. Otherwise, the lube should not be checked or changed unless a leak is suspected or repair required.

Note: The lubricant fill specification is 3.0 liters (6.5 pints) when the axle is installed in the vehicle. If the axle is out of the vehicle, fill with 3.5 liters (7.5 pints) of specified lubricant.




Torque Specifications (Integral Carrier)
DescriptionNmLb-Ft
Differential Bearing Cap Bolt109-12980-95
Differential Pinion Shaft Lock Bolt Using Loctite® E0AZ-19554-B
or Equivalent		20-4015-30
Ring Gear Attaching Bolts Using Loctite® E0AZ-19554-B
or Equivalent		136-163100-120