Section 04-04: Wheels and Tires
1996 F-150, F-250, F-350, F-Super Duty Chassis Cab, F-Super Duty Motorhome Chassis and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Wheel Ornaments

Removal

  1. Remove retaining screws (if equipped) and insert the tapered end of a lug wrench between the ornament and wheel.

  1. Use a prying or twisting motion to dislodge wheel ornament.

 

Installation

  1. Insert one side of the ornament into the center of the wheel opening.

  1. Strike the opposite side of the ornament with the palm of the hand until the ornament is fully seated in the wheel opening.

  1. Install retaining screws (if equipped).

 

Center Attached Wheel Covers

Removal

  1. Insert the tapered end of a lug wrench between the wheel cover (1130) and wheel.

  1. Use a prying or twisting motion to dislodge wheel cover.

Installation

  1. Insert one side of the wheel cover into the center of the wheel opening.

  1. Strike the opposite side of the wheel cover with the palm of the hand until the wheel cover is fully seated in the wheel opening.