Section 04-01B: Suspension, Front, 4-Wheel Drive
1996 F-150, F-250, F-350 4x4 and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Bumper, Front

Removal

  1. Remove the hex-head bolt or nut that holds front suspension bumper to frame.

  1. Remove front suspension bumper (3020).

 

Installation

  1. Position front suspension bumper in the same holes as those from which it was removed in frame.

  1. Install the hex-head bolt and tighten to 17-23 Nm (13-16 lb-ft).