Section 03-14: Engine Controls, Electronic
1996 F-150, F-250, F-350, F-Super Duty Series and Bronco Vehicles Workshop Manual
REMOVAL AND INSTALLATION

Knock Sensor (KS)

Gasoline Engines

Removal

  1. NOTE: 7.5L, 5.0L and 5.8L do not require a knock sensor.

    Disconnect knock sensor electrical connector.

  1. Remove knock sensor (KS) (12A699) from cylinder block.

Installation

  1. Follow removal procedures in reverse order.

  1. Tighten knock sensor to 20-27 Nm (15-20 lb-ft).