Section 03-14: Engine Controls, Electronic
1996 F-150, F-250, F-350, F-Super Duty Series and Bronco Vehicles Workshop Manual
REMOVAL AND INSTALLATION

Misfire Sensor

 

Removal

  1. Disconnect battery negative cable.

  1. If engine is a V-8, proceed to next step. On a 4.9L engine, remove engine cooling fan and shroud. Refer to Section 03-05.

  1. Remove attaching screws and timing pointer.

  1. Disconnect wiring and remove sensor.

 

Installation

  1. Follow removal procedures in reverse order.

  1. Tighten attaching screws to 8-12 Nm (75-105 lb-in).