Section 03-13: Evaporative Emissions
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Evaporative Emission Canister

Removal

Refer to the appropriate illustration for component location.

  1. Disconnect vapor hoses from evaporative emissions canister (EVAP canister) (9D653).

  1. Remove screw retaining evaporative emissions canister to fuel bracket (9D664) or fender apron.

  1. Lift evaporative emissions canister to disengage tab on back side of evaporative emissions canister, and remove evaporative emissions canister.

 

Installation

  1. For installation, follow removal procedures in reverse order.

  1. Tighten retaining screw to 5-7 Nm (44-62 lb-in).