Engine Air Cleaner Intake Duct and Tube, 7.3L Direct Injection Diesel Engine

Removal

1. Remove screw retaining air cleaner duct to radiator support.

2. Disconnect duct from housing.

Installation

1. Follow removal procedures in reverse order.

2. Tighten retaining screws to 7-9 Nm (62-80 lb-in).

   
   
   Engine Air Cleaner Intake Duct Assembly
   
   
   
   
   
   

   Item	Part Number	Description
   1	6K682	Turbocharger
   2	—	Compressor Duct Elbow Clamp (Part of 6K682)
   3	—	Compressor Duct Elbow (Part of 6K682)
   4	9B676	Engine Air Cleaner Duct Tube Adapter
   5	9600	Engine Air Cleaner
   6	9N622	Restriction Gauge
   7	—	Nut (Part of 9600)
   8	N800576-S2	Screw
   9	9A624	Engine Air Cleaner Intake Tube
   10	—	Clamps (Part of 9B676)
   A	—	Tighten to 7-9 Nm (62-80 Lb-In)
   B	—	Tighten to 1.5-2.5 Nm (14-22 Lb-In)