Section 03-07A: Ignition, Distributor | 1996 F-Series and Bronco with Gasoline Engines Workshop Manual |
| Engine | Spark Plug Type | Spark Plug Gap | Firing Order | Timing |
|---|---|---|---|---|
| 4.9L (GFP) | BSF-44PM | 1.07-1.17mm (0.042-0.046 Inch) | 153624 | BTDC 10° ± 2° |
| 4.9L (Gas) | BSF-44C | 1.07-1.17mm (0.042-0.046 Inch) | 153624 | BTDC 10° ± 2° |
| 5.0L | ASF-42P | 1.3-1.4mm (0.052-0.056 Inch) | 13726548 | BTDC 10° ± 2° |
| 5.8L | ASF-32C | 1.07-1.17mm (0.042-0.046 Inch) | 13726548 | BTDC 10° ± 2° |
| 7.5L | ASF-42C | 1.07-1.17mm (0.042-0.046 Inch) | 15426378 | BTDC 10° ± 2° |
| Description | Nm | Lb-Ft | Lb-In |
|---|---|---|---|
| Distributor Hold-Down Bolt | 23-34 | 17-25 | — |
| Stator Assembly Screws | 1.7-4.0 | — | 15-35 |
| Spark Plugs, 4.9L | 14-20 | 10-15 | — |
| Spark Plugs (Except 4.9L) | 9-20 | 7-15 | — |
| ICM-to-Heat Sink Screws | 1.2-1.8 | — | 11-16 |
| ICM/Heat Sink Assembly-to-Left Fender Apron Screws | 9-14 | — | 80-124 |
| Distributor Cap Hold-down Screws | 2.0-2.6 | — | 18-23 |
| Octane Rod Retaining Screw | 1.7-4.0 | — | 15-35 |
| Distributor Adapter Base to Distributor Base | 2.8-4.0 | — | 25-35 |
| Armature Retaining Screws | 2.8-4.0 | — | 25-35 |
| Coil to Bracket Retaining Screws | 2.8-4.0 | — | 25-35 |