Section 03-07A: Ignition, Distributor
1996 F-Series and Bronco with Gasoline Engines Workshop Manual
REMOVAL AND INSTALLATION

Distributor Rotor

Removal

  1. Loosen attaching screws and remove distributor cap (12106) with wires attached.

  1. Remove distributor rotor (12200) by pulling upward on the distributor rotor from the distributor shaft.

 

Installation

  1. Inspect distributor rotor for cracks, carbon tracks, burns or damage.

  1. Replace distributor rotor, if damage is found.

  1. Align locating boss and fully seat distributor rotor on distributor shaft.





  1. Reinstall distributor cap.