1996 Bronco/F-Series

Section 03-06B: Starting System, Diesel Engines

1996 F-250, F-350 and F-Super Duty Workshop Manual

SPECIFICATIONS

STARTER SPECIFICATIONS
Starter Motor Max. Load No Load Starter Brushes

Motor Diameter Current Draw Under Normal Load Normal Engine Cranking Speed Min. Stall Torque @ 2.5 Volts Amps Amps Mfg. Length Spring Tension

mm Inches Amps RPM Nm Lb-Ft mm Inches N Oz.

85 3.4 230-630 150-200 37.3 27.5 2400 170 Max. 18 0.71 34 122

STARTER SPECIFICATIONS
Starter Motor	Max. Load	No Load	Starter Brushes
Motor Diameter	Current Draw Under Normal Load	Normal Engine Cranking Speed	Min. Stall Torque @ 2.5 Volts	Amps	Amps	Mfg. Length	Spring Tension
mm	Inches	Amps	RPM	Nm	Lb-Ft	mm	Inches	N	Oz.
85	3.4	230-630	150-200	37.3	27.5	2400	170 Max.	18	0.71	34	122

Note: Maximum commutator runout is 0.12mm (0.005 inch). Maximum starting circuit voltage drop (battery positive terminal to start terminal) at normal engine temperature is 0.5 volt.

TORQUE SPECIFICATIONS
Description Nm Lb-In

Starter Solenoid Screws 5-7 44-62

Solenoid M-Terminal Nuts 10-12 89-106

Solenoid B-Terminal Nuts 9-14 80-124

Starter Thru Bolts 8-10 71-89

Starter Mounting Bolts 20-27 180-240

Brush Holder 2-3 18-27

Description	Nm	Lb-In
Starter Solenoid Screws	5-7	44-62
Solenoid M-Terminal Nuts	10-12	89-106
Solenoid B-Terminal Nuts	9-14	80-124
Starter Thru Bolts	8-10	71-89
Starter Mounting Bolts	20-27	180-240
Brush Holder	2-3	18-27