Section 03-04E: Turbocharger, 7.3L Diesel Engine
1996 F-250, F-350 and F-Super Duty Workshop Manual
REMOVAL AND INSTALLATION

Exhaust Inlet Adapter

Removal

  1. Raise vehicle.

  1. Loosen nuts and bolts securing right and left turbocharger exhaust inlet pipes to exhaust manifolds.

  1. Lower vehicle.

  1. Remove bolts securing right and left turbocharger exhaust inlet pipes to turbocharger exhaust inlet adapter.

  1. Remove bolts securing turbocharger exhaust inlet adapter to turbocharger.

  1. Remove turbocharger exhaust inlet adapter and turbocharger exhaust inlet adapter gasket.

  1. Clean gasket sealing surfaces.

Installation

  1. Position turbocharger exhaust inlet adapter with new turbocharger exhaust inlet adapter gasket to turbocharger. Install retaining bolts and tighten to 24 Nm (18 lb-ft).

  1. Position right and left turbocharger exhaust inlet pipes to turbocharger exhaust inlet adapter and install retaining bolts. Tighten bolts to 24 Nm (18 lb-ft).

  1. Raise vehicle.

  1. Tighten nuts and bolts securing right and left turbocharger exhaust inlet pipes to exhaust manifolds to 24 Nm (18 lb-ft).

  1. Lower vehicle.