Section 03-04B: Fuel Charging and Controls, 5.0L and 5.8L Engines
1996 Vehicles Equipped with 5.0L and 5.8L SFI V-8 Engines Workshop Manual
REMOVAL AND INSTALLATION

Fuel Charging Wiring

Removal

  1. Remove upper intake manifold (9424) as described in Section 03-01B.

  1. Disconnect fuel charging wiring (9D930) from fuel injector (9F593) and electronic engine controls.

  1. Remove fuel charging wiring ground strap retainer nut and ground strap.

  1. Disconnect fuel charging wiring from engine control sensor wiring.

 

Installation

  1. Follow removal procedures in reverse order. Verify all connections.