Section 03-03: Engine Cooling | 1996 F-150, F-250, F-350, F-Super Duty, Bronco Vehicles and F-250, F-350 and F-Super Duty Vehicles with 7.3L Diesel Engines Workshop Manual |
Check to see that the fitting nut is fully tightened. If the leak persists, apply a thin, even coat of Dow Corning 1200 primer or equivalent using a brush. Allow to dry for 10 minutes at room temperature. Apply Dow Corning Silastic 734RTV or equivalent in undiluted form around the leaking connection and allow it to dry for one hour.
NOTE: In-tank transmission oil coolers must not be replaced. Instead, for aluminum radiators, replace the complete radiator assembly.