Section 03-03: Engine Cooling
1996 F-150, F-250, F-350, F-Super Duty, Bronco Vehicles and F-250, F-350 and F-Super Duty Vehicles with 7.3L Diesel Engines Workshop Manual
REMOVAL AND INSTALLATION

Water Inlet Tube, 7.3L Diesel Only

 

Removal

  1. Drain the cooling system. Refer to Cooling System Draining, Filling and Bleeding in this section.

  1. Raise vehicle.

  1. Remove the lower radiator hose clamp and disconnect the lower radiator hose (8286) from the water pump inlet.

  1. Remove the water pump inlet retaining bolts.

  1. Remove the water pump inlet and O-ring.

Installation

  1. Follow removal procedure in reverse order.