Section 03-01D: Engine, Diesel, 7.3L
1996 F-Series Workshop Manual
REMOVAL AND INSTALLATION

Oil Filter

Removal

  1. Raise vehicle.

  1. Remove the oil filter (6731), using a suitable oil filter wrench.

Installation

  1. Clean the gasket mating surface on the oil filter flange.

  1. Lightly coat the gasket sealing surface with clean engine oil.

  1. Install the oil filter until the seal contacts the filter flange and then tighten 1-1/4 to 2 additional turns.

  1. Lower vehicle.

  1. Check engine oil level, and add as required.

  1. Run engine and check for oil leaks.