Section 03-01C: Engine, 7.5L MFI
1996 F-250, F-350, F-Super Duty Chassis Cab and Motorhome Workshop Manual
IN-VEHICLE SERVICE

Flywheel

 

Removal

  1. Remove the transmission (7003) from vehicle. Refer to Section 07-01A, Section 07-01B, Section 07-03A or Section 07-03B. Remove the flywheel mounting bolts and remove flywheel (6375) from the crankshaft (6303).

  1. Refer to Section 03-00 for inspection.

Installation

  1. Install flywheel on crankshaft. Install the mounting bolts. Tighten to 103-115 Nm (75-85 lb-ft).

  1. Check flywheel runout and flywheel ring gear runout using Dial Indicator with Bracketry 014-00282 or equivalent. Refer to Specifications in this section. If readings are not within specification, replace flywheel.

  1. Install transmission assembly into vehicle. Refer to Section 07-01A, Section 07-01B, Section 07-03A or Section 07-03B.