Section 03-01C: Engine, 7.5L MFI | 1996 F-250, F-350, F-Super Duty Chassis Cab and Motorhome Workshop Manual |
The cooling system is a series-parallel flow design. Coolant flow is from the water pump through passages in the engine front cover (both sides) to the cylinder block. Flow continues through the cylinder block toward the rear of the engine and into the cylinder head at various transfer passages along the length of the cylinder block deck. It then travels from the cylinder heads to the water crossover at the front of the intake manifold, through the water outlet connection and to the top of the radiator.
Cooling System
| Item | Part Number | Description |
|---|---|---|
| 1 | 6049 | Cylinder Head (RH) |
| 2 | — | Heater Inlet (Part of 18476) |
| 3 | 18476 | Heater Core |
| 4 | 6010 | Cylinder Block (RH Bank) |
| 5 | — | Heater Outlet (Part of 18476) |
| 6 | 6010 | Cylinder Block (LH Bank) |
| 7 | 6051 | Head Gasket |
| 8 | 6049 | Cylinder Head (LH) |
| 9 | 8592 | Water Hose Connection |
| 10 | 8A080 | Radiator Coolant Recovery Reservoir |
| 11 | 6B856 | Engine Oil Cooler |
| 12 | 6019 | Engine Front Cover |
| 13 | — | Radiator Outlet (Part of 8005) |
| 14 | 8005 | Radiator |
| 15 | 8501 | Water Pump |
| 16 | — | Heater Outlet (Part of 18476) |
| 17 | — | Radiator Inlet (Part of 8005) |
| 18 | 8575 | Water Thermostat |
| 19 | 8592 | Water Hose Connection |