Section 03-01A: Engine, 4.9L SFI
1996 F-150, F-250, F-350 (4x2), F-150, F-250 (4x4) Workshop Manual
IN-VEHICLE SERVICE

Sensors

 

Oil Pressure Sender/Switch

Removal

  1. Open hood (16612).

  1. Disconnect oil pressure switch lead.

  1. Using suitable oil pressure sender socket, remove oil pressure sensor (9278).

Installation

  1. Start replacement oil pressure sensor by hand. Using suitable oil pressure sender socket, tighten to 11-24 Nm (8-18 lb-ft).

  1. Connect oil pressure sensor.

  1. Start engine (6007) and check for leaks and oil pressure gauge operation.

  1. Close hood.