Section 02-03: Engine and Transmission Mounting
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Support Bracket, Transmission

Removal

  1. Support the engine (6007) using a wood block and jack placed under the oil pan (6675).

  1. Remove the nuts and washers attaching the insulators to the crossmember bracket(s). Lift the engine sufficiently to disengage the insulator stud from the engine crossmember bracket(s).

  1. Remove the bolts and nuts holding the support brackets to the crossmember.

  1. Remove the support bracket(s) from the crossmember.

Installation

  1. Follow removal procedures in reverse order.

  1. Refer to the appropriate illustration for tightening specifications.