Section 02-03: Engine and Transmission Mounting
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Support Insulators, Front Engine

Removal

  1. Remove the radiator overflow hose from the radiator coolant recovery reservoir and detach it from the fan shroud (8146) (where appropriate).

  1. Remove the fan shroud attaching screws and lift the fan shroud back and drape it onto the fan blade (8600).

  1. Support the engine (6007) using a wood block and a jack placed under the oil pan (6675).

  1. Remove the nuts and washers attaching the insulators to the crossmember brackets. Lift the engine sufficiently to disengage the insulator stud from the engine crossmember bracket(s).

  1. Remove bolt attaching fuel pump shield to left engine bracket, if required.

  1. Remove insulator-to-engine or engine bracket attaching nut and washer assembly. Remove engine mount.

Installation

  1. Follow removal procedures in reverse order.

  1. Refer to the appropriate illustration for tightening specifications.