Section 02-02: Body Mounting
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
DISASSEMBLY AND ASSEMBLY

Body Insulators

Disassembly

  1. Remove nut and washer from top of radiator support.

  1. Back out bolt from under lower insulator.

Assembly

  1. Place upper insulator on frame bracket.

  1. Position lower bolt through lower insulator and thread into shaft of upper insulator. Tighten bolt to 61-101 Nm (45-74 lb-ft). Make sure upper absorber is properly seated into frame bracket.

  1. Replace shims that were removed during disassembly.

  1. Replace radiator support.

  1. Replace washer on top of radiator support and nut. Tighten to 46-68 Nm (34-50 lb-ft).