Air Bag Modules

NOTE: The various major assemblies in the supplemental air bag restraint system have been designed to be tamper-resistant and are not to be disassembled for service. Component assemblies may be removed and replaced as required by diagnosis and testing.

NOTE: Original parts should be reinstalled in the vehicle if replacement parts have no effect on the repair.

Information on safe and effective replacement for supplemental air bag restraint system components and handling are provided in this section. Refer to the Diagnosis and Testing and the Removal and Installation portions of this section for complete and effective service of the supplemental air bag restraint system.

When replacing driver side air bag module (043B13), a prepaid return postcard is provided with the replacement driver side air bag module to allow tracking into the vehicle in which it was placed. The serial number for the new part and VIN number must be recorded and sent to Ford Customer Service Division (FCSD), Ford Motor Company, P. O. Box 1904, Dearborn, MI 48121-9976.

For information on proper handling, storage, and disposal of the air bag inflator assemblies, refer to the Removal and Installation and Diagnosis and Testing portions of this section.

Vehicle Identification Number Location