Section 01-19: Bumpers | 1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual |
Removal
The rear bumper (17906) installation for all models is shown in the following illustration.
Remove bolts attaching rear bumper isolator and bracket (17787) (RH) and rear bumper isolator and bracket (17788) (LH) to frame (5005) (side rails).
Remove rear bumper, rear bumper isolator and bracket (RH) and rear bumper isolator and bracket (LH).
Remove the rear bumper isolator and bracket (RH) and rear bumper isolator and bracket (LH) from the rear bumper.
Installation
Follow removal procedures in reverse order.
| Item | Part Number | Description |
|---|---|---|
| 1 | 17B807 | Rear Bumper Step |
| 2 | N802118-S | Screw and Washer (2 Req'd) LH Side Only |
| 3 | 13406 | Rear License Plate Bracket, (1 Req'd), LH Side Without Bumper |
| 4 | W620397-S36 | Nut and Washer (2 Req'd) LH Side Only |
| 5 | 5005 | Frame (Side Rail) |
| 6 | 17787 | Rear Bumper Isolator and Bracket |
| 7 | N807422-S60 | Bolt (1 Req'd Each Side) F-Series |
| 8 | N807254-S60 | Bolt (1 Req'd Each Side) F-Series |
| 9 | N620484-S60 | Nut (1 Req'd Each Side) F-Series |
| 10 | N621945-S | Nut and Washer Assembly (1 Req'd Each Side) |
| 11 | 17795 | Arm, Rear Bumper, Outer |
| 12 | N806694-S100 | Bolt and Retainer Assembly (1 Req'd Each Side) |
| 13 | N804926-S104 | Bolt (1 Req'd Each Side) Argent or Chrome |
| 14 | N620484-S2 | Nut and Washer (2 Req'd Each Side) |
| 15 | 17775 | Rear Bumper |
| 16 | N6620484-S60 | Nut and Washer (Bronco) |
| A | — | Tighten to 98-132 Nm (72-98 Lb-Ft) |
| B | — | Tighten to 45-65 Nm (33-48 Lb-Ft) |
| C | — | For Dual Wheels Only |
| D | — | For F-150, F-250, F-350 and Bronco |