Section 01-16: Wiper and Washer Systems
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Washer Pump and Reservoir

 CAUTION: Do not make electrical connection prior to filling windshield washer reservoir (17618). Do not operate windshield washer pump (17664) prior to filling windshield washer reservoir.

NOTE: The windshield washer reservoir and windshield washer reservoir cover (17632) are not serviced separately. The retaining ring, seal and pump impeller can be serviced as individual components.

Removal

  1. Open hood (16612) and disconnect battery ground cable (14301).

  1. Disconnect headlamp dash panel junction wire (14290) from windshield washer pump, using a small screwdriver to unlock tabs.

  1. Disconnect hose (17543) from windshield washer nozzle jet and bracket (17603).

  1. Remove screws or nuts retaining windshield washer reservoir to front fender (16005) or washer reservoir mounting bracket (17651).

  1. Disconnect hose to drain windshield washer reservoir.

 

Installation

  1. Follow removal procedures in reverse order.



    Windshield Washer Pump, Reservoir and Jet Installation





    ItemPart NumberDescription
    117603Windshield Washer Nozzle Jet and Bracket
    217543Hose
    302012Cowl Top Outer Panel
    416005Front Fender, Inner
    5N606690-S36Screw and Washer (2 Req'd)
    617651Washer Reservoir Mounting Bracket
    761A12Retainer
    816102Front Fender Splash Shield
    914290Headlamp Dash Panel Junction Wire
    1017618Windshield Washer Reservoir
    11N621906-S36Nut (2 Req'd)