Section 01-14A: Handles, Locks, Latches and Mechanisms
1996 F-150, F-250, F-350, F-Super Duty and Bronco Workshop Manual
REMOVAL AND INSTALLATION

Handle, Outside Door, Front

Removal

  1. Remove the front door trim panel (23942) and front door trim shield (237A04) from the front door (20124). Refer to Section 01-05.

  1. Disconnect the front door latch actuating rod (22152) from the handle link connector.

  1. Remove one nut and screw.

  1. Remove handle and pads from door.

Installation

  1. Follow removal procedures in reverse order.